Pertronic

Menu

Amplifiers & Accessories

< Back to category

EVACGEN-EA

Evac Generator Module

EVAC Generator AusWebsite

The Pertronic EVACGEN Evacuate Generator extends the F220, F100A and F120A analogue addressable Automatic Fire Detection Systemby providing a fully monitored interface between the control panel and a third party 100 Vrms amplifier. When commended by the Fire Alarm Control Panel, the EVAC Generator supplies audible evacuation tones to the input of the amplifier

Four selectable inputs are provided, each of which can be programmed to produce different tones when activated. Two of the tones may include a voice message

The EVAC Generator also provides two audio microphone or line inputs with PTT.

The Evacuate Generator connects to a Pertronic F220, F100A or F120A using four wire RS485 or directly via a monitored Bell circuit. Typically, the EVAC Generator connects to the standard RS485 bus (2-wire data and 24 Vdc power) for communications. An additional 24 Vdc power connection is required, which may be from an external isolated power supply. Additional information can be obtained in the Evacuate Generator Technical Manual.

Features

  • Dual microphone / line inputs, with individual volume control and Press to Talk (PTT)
  • Tone and line output volume controls
  • Optional test message and tone selection
  • Four pull-down control inputs
  • Bell circuit input and output connections
  • Closed loop amplifier monitoring
  • 100 Vrms 250W switching capability
  • 44 tone/voice combinations available
  • 2 voice messages available
  • Configurable on site without tools
  • Monitored fire panel input
  • External fault input
  • Active and fault relay outputs
  • Compatible with 120W (EVAC120W24V) and 250W (EVAC250W24V) 100 Vrms amplifiers available from Pertronic Industries

Tones

Tone 01

AS 2220 Evac Tone with Evacuate Message

Tone 26

1.4 kHz - 1.6 kHz 2 Hz

Tone 02

AS 2220 Evac Tone

Tone 27

660Hz - continuous

Tone 03

Intermittent 420 Hz Tone + Alert Message (EVACGEN-EA)

Tone 28

544Hz / 440 Hz - alternating

 

Intermittent 420 Hz Tone + Evac. Message (EVACGEN-ET)

Tone 29

544 @ 0.875s Intermittent

Tone 04

Intermittent 420 Hz Alert Tone

Tone 30

800Hz @ 2Hz Intermittent

Tone 05

T3 Cadence with Evacuate Message

Tone 31

800 / 1000 Hz @ 25 Hz Sweeping

Tone 06

T3 Cadence

Tone 32

2400 / 2900 @ 25 Hz Sweeping

Tone 07

Simulated Bell Tone

Tone 33

554 Hz Continuous

Tone 08

PA400 Tone

Tone 34

440 Hz Continuous

Tone 09

Claxon (Star Trek)

Tone 35

800 / 100 Hz @ 7 Hz Sweeping

Tone 10

400-700 Hz - 1.5 sec Whoop

Tone 36

660 / 1200 Hz @ 1.5 Second Sweep

Tone 11

800 / 1000 Hz @ 1 Hz Sweeping

Tone 37

Two-Tone Chime 1000/650 Hz

Tone 12

400 / 450 Hz @ 0.5 Hz Tone

Tone 38

745 Hz @ 1 Hz - intermittent

Tone 13

2400 / 2900 Hz 7 Hz Sweeping

Tone 39

1000 & 2000 Hz @ 0.5 s alternating

Tone 14

2400 / 2900 Hz 1 Hz Sweeping

Tone 40

1000 Hz continuous - PEEER Toxix Gas

Tone 15

500 / 1200 Hz @ 1 Hz Sweeping

Tone 41

2000 Hz Continuous

Tone 16

1200 / 500 Hz @ 1 Hz DIN / PFEER

Tone 42

1200 Hz Continuous

Tone 17

2400 / 2900 Hz @ 2 Hz Alternating

Tone 43

800 Hz/1000 Hz @ 4 Hz Alternating

Tone 18

1000 Hz @ 1 Hz Intermittent

Tone 44

RH3 Tone 500 Hz – 1400 Hz @ 5 Hz Repetition

Tone 19

800 / 1000 Hz @ 0.875 Hz Alternating

Tone 45

'SOS' in Morse code

Tone 20

2400 Hz @ 1 Hz Intermittent

Tone 46

T3 cadence (EVACGEN-EA)

Tone 21

800 Hz 0.25 s on, 1 s off  Intermittent

 

Test message with T3 cadence (EVACGEN-ET)

Tone 22

800 Hz Continuous

Tone 47

400-1200 Hz Sweep 0.5 s on 0.5 s off (EVACGEN-EA)

Tone 23

660 Hz 150 mS on, 150 mS off Intermittent

 

Test message (EVACGEN-ET)

Tone 24

544 (100 mS) / 440 Hz (400 mS) - NF S 32-001

Tone 48

590 Hz

Tone 25

660 Hz 1.8 s on, 1.8 s off Intermittent

   

Ordering Information

Product Code

Description

EVACGEN-EA

EVAC Generator for up to 250W, Evac/Alert


Enquire about this product