Product search

Modules

M210EA Module

AA Single Channel Input Module

The Analogue Addressable Single Channel Input Module (M210EA) monitors one set of normally open contacts.

The M210EA has a single tri-colour green/red/yellow LED, which can be set by panel command to pulse green each time the module is polled. The fire panel can be configured to switch the red indicator on continuously in the event of an alarm. The indicator blinks yellow if the module detects an open-circuit on the input circuit.

This module features automatic fault supervision and a built-in isolator on the analogue addressable circuit. The isolator may be bypassed. Please refer to the installation instructions for details.

Screwdriver operated rotary switches allow the module address to be configured from either the front or one side of the module.

Two mounting holes and a pair of DIN rail clips allow the module to be installed in any type of enclosure, including a purpose-built surface-mount box (M200E-SMB). The indicator LEDs and address switches are accessible and visible in both DIN-rail and surface mount installations.

Features:

Individually addressable by the fire panel
Input circuit supervised for open-circuit faults
Tri-colour indicator LED visible from front and one side
Automatic detection of short-circuits on AA circuit
AA circuit short-circuit isolator
Optional isolator bypass
Screwdriver operated rotary address switches, accessible from front and one side
Clips for top hat 35 mm DIN rail
Two mounting holes
Compatible with Pertronic F220 and F100A analogue addressable fire panels
Up to 99 module addresses per AA circuit (F220, F100A)
Uses one address on the analogue addressable circuit
Supplied complete with one 47 kΩ end of line resistor
ActivFire listed (afp-3650) to AS ISO 7240.17:2015 and AS ISO 7240:18:2015
Direct replacement for M210E in existing Pertronic systems